Polyurethane - 2 Component Pedestrian Traffic Coatings - Betway online casino slots ®-726 Balcony One Shot
TWO COMPONENT, ALIPHATIC, CHEMICALLY-CURED, PRIMERLESS POLYURETHANE PEDESTRIAN WATERPROOFING & Betway online casino slots COATING SYSTEM
Sikalastic®-726 Balcony One Shot is a two-component, aliphatic, chemically cured, elastomeric polyurethane waterproofing coating system that has both superior flexibility and abrasion resistance. Easily applied in a single coat with or without Betway online casino slots and designed for pedestrian traffic specifically balcony waterproofing applications.
- One Step System of 35 mils
- Integrally textured for slip resistance
- Low odor and fast turnarounds
- Outstanding resistance to abrasion and wear
- UV resistant
- Resistant to deicing salts
- Primerless on concrete- can be applied with Betway online casino slots
Usage
Betway online casino slots ®-726 Balcony One Shot is designed for exclusive use on pedestrian traffic applications. Including:
- Balconies
- Pedestrian Plaza & Rooftop Decks
- Foot bridges and walkways
- Mechanical rooms
Advantages
- One Step System of 35 mils
- Integrally textured for slip resistance
- Low odor and fast turnarounds
- Outstanding resistance to abrasion and wear
- UV resistant
- Resistant to deicing salts
- Primerless on concrete- can be applied with Betway online casino slots
Packaging
2.66 Betway online casino slots . kit; 2x 1.20 Betway online casino slots . comp. A, 2x 0.13 Betway online casino slots . comp. B, 2x 2.19 lbs. comp. C
Color
Gray & Tan
Product Details
Product Information
Shelf Life1 year in original, unopened containers.
Storage ConditionsStore dry at 41-95 °F (5-35 °C).
Condition material to 65-85 °F (18-30 °C) before using.
Volatile organic compound (VOC) content<100 g/L
Technical Information
Dry film thickness35 mils (38 WFT)
50 sf/ 1.33 Betway online casino slots A+B mix
Application
Application Steps
SUBSTRATE PREPARATIONBetway online casino slots ®-726 Balcony One Shot is applied in a single step, because of this proper substrate preparation is essential to achieve the proper performance of Betway online casino slots ®-726 Balcony One Shot.
Betway online casino slots -
Should be cleaned and prepared to achieve a laitance and contaminant-free, open textured surface by blast cleaning or equivalent mechanical means. The desired surface texture is CSP 3 per ICRI Guidelines. In addition, the substrate surface must be thoroughly cleaned by blowing/vacuuming to remove all particulates that may interfere with bonding. Can be applied with or without Betway online casino slots .
Plywood -
Should be clean and smooth, APA and exterior grade, not less than ½” thick, and spaced and supported according to APA guidelines. Joints should be sealed with Sikaflex® 2c or 1a and detailed and may need embedded fabric reinforcement. Betway online casino slots is required for plywood.
DETAILING
Non-structural cracks up to 1/16 inch - Apply a detail coat of a Betway online casino slots ® 710, 710 NP or 720 Base Coat at 23 mils dry, 4” wide, centered over the crack. Allow to become tack free before overcoating.
Cracks and Betway online casino slots over 1/16 up to 1 inch - Seal previously routed and primed cracks and joints with Sika Sealant and allow to skin over and cure for 24 hours min. Apply a detail coat of a Betway online casino slots ® 710, 710 NP or 720 Base Coat at 23 mils dry, 4” wide, centered over the crack. Allow to become tack free before overcoating.
Betway online casino slots over 1 inch - Should be treated as expansion joints and brought up through the Betway online casino slots ® Traffic System and sealed with Sika sealant (see Sealant Guide).
Panelized Betway online casino slots - Panelized Betway online casino slots that are restrained across the joint and without differential movement may be sealed and the deck coating, including detail coat, applied over the joint.
NOTE: movement within panelized joints may cause deterioration of the aggregated wear coat, in which case the joints should be treated as expansion joints and brought up through the Betway online casino slots Traffic System and sealed with Sikaflex® sealant.
PRIMING
Sikalastic®-726 Balcony One Shot does not require Betway online casino slots on direct application to concrete with moisture content below 4%, other substrates may require Betway online casino slots .
Betway online casino slots Selection - Determine maximum moisture content of concrete substrate by weight with a Tramex CME or CMExpert type concrete moisture meter. Betway online casino slots is not required for concrete but if moisture content in concrete is greater than 4% then Sikalastic® MT Betway online casino slots is required, see Betway online casino slots guide below.
Sikadur®-22 Lo-Mod FS- For concrete with a maximum moisture content of 4 % by weight and existing polyurethane coatings, apply a single coat application of Sikadur®-22 Lo-Mod FS with a flat squeegee or roller at approximately 160 sf/gal. Apply evenly without puddling. Allow Betway online casino slots to cure until tack-free, typically 2-4 hours(at 75°F (24°C) 50 % R. H). Sikadur®-22 Lo-Mod FS should be overcoated within 36 hours after tack-free. Refer to a separate product data sheet for additional information.
Sikalastic® Betway online casino slots - For existing polyurethane coatings only, clean then solvent wipe existing coating, allow solvent to flash off, and then apply Sikalastic® Betway online casino slots with a flat squeegee or phenolic resin core roller at approximately 250 - 300 sf/gal. and work well into the substrate to ensure adequate penetration and sealing, and puddles are avoided. Sikalastic® Betway online casino slots is not suitable for metal substrates. Sikalastic® Betway online casino slots adheres to sealants and existing coatings. Refer to separate Betway online casino slots data sheet for additional information.
Sikalastic® FTP LoVOC Betway online casino slots - For plywood decks, for concrete with a maximum moisture content of 4 % by weight, and existing polyurethane coatings, apply Sikalastic® FTP LoVOC Betway online casino slots with a flat squeegee or roller at approximately 175 sf/gal. Work Betway online casino slots well into the substrate to ensure adequate penetration and sealing. Apply evenly without puddling. Refer to separate Betway online casino slots data sheet for additional information
Sikalastic® MT Betway online casino slots - For concrete with a maximum moisture content of 5 % by weight, and for metal flanges and penetrations, apply Sikalastic® MT Betway online casino slots with a flat squeegee or roller at approximately 175 sf/gal. For concrete decks with a maximum moisture content of 6% by weight, apply two applications of Sikalastic® MT Betway online casino slots with a flat squeegee or phenolic resin roller at approximately 175 sf/gal per application. Work Betway online casino slots well into the substrate to ensure adequate penetration and sealing. Apply evenly without puddling. Refer to separate Betway online casino slots data sheet for additional information.
Sikadur®-22 Lo-Mod LT- For cold weather applications on concrete with a maximum moisture content of 4 % by weight and existing polyurethane coatings, apply a single coat application of Sikadur®-22 Lo-Mod LT with a flat squeegee or roller at approximately 160 sf/gal. Apply evenly without puddling. Allow Betway online casino slots to cure until tack-free, typically 2-4 hours (at 50°F (10°C) 50 % R. H). Sikadur®-22 Lo-Mod LT should be overcoated within 36 hours after tack-free. Refer to a separate product data sheet for additional information.
Sikalastic® EP Betway online casino slots /Sealer- For Wood (timber, plywood) and Metal (aluminum, galvanized, cast iron, copper, lead, brass, stainless steel, steel, zinc). Apply by brush or phenolic resin core roller at the recommended rate,100-250 sf/gal depending on the substrate. Correct amount of Betway online casino slots will saturate the substrate and leave a slight film on the substrate top surface. Apply evenly without puddling. Refer to separate Betway online casino slots data sheet for additional information.
MIXINGPremix the Part A component using a low speed (400-600 rpm) mechanical mixer and Jiffy Paddle (2-5 Gallon Model) to obtain uniform color, making sure to scrape the solids from the bottom and sides of the pail. Pour Part C slowly into Part A and ensure aggregate from Part C is fully mixed into Part A. Slowly pour Part B into Part A/C mix and while mixing scrape the side of the container. Mix the combined material thoroughly until a homogenous mixture and uniform color is obtained (typically 3 minutes). Use care not to allow the entrapment of air into the mixture.
APPLICATIONBetway online casino slots at 37 sf/gal to yield 38 WFT using a notched squeegee or trowel (Recommend: 1/4" V-notched squeegee or trowel) , and backroll using a phenolic resin core roller (3/8") the area should be backrolled two times, one perpendicular to the other. Ensure roller is saturated with excess material before starting backroll. Extend coating over entire area including previously detailed cracks and joints. Coating should be tack fee after about 6 hours at 70 °F and 50 % RH. Allow coating to cure for a minimum of 8 hours before opening to pedestrian traffic.
REMOVAL
Remove liquid coating immediately with dry cloth. Once cured, coating can only be removed by mechanical means.
See More
See Less