Primers Pedestrian Traffic Coatings - Sikalastic® EP betway sports login /Sealer
Two-component, Universal betway sports login .
Sikalastic® EP betway sports login /Sealer consists of two components: an epoxy resin (Part A), and an activator (Part B). In its wet mixed state, it is red in color.
Low odor, low VOC formulation Compatible with most common betway sports login and flashing materials Corrosion protection in industrial and marine environments Enhances adhesion to a broad range of metallic substrates Protects against migration of volatile bitumen or plasticizers Easy application by brush or roller Usage
Versatile betway sports login for use with:
Sikalastic® RoofPRO Systems Sikalastic® DeckPRO Systems Suitable for use on most sound betway sports login surfaces where both a penetrative and surface-lying effect is required.
Advantages
Low odor, low VOC formulation Compatible with most common betway sports login and flashing materials Corrosion protection in industrial and marine environments Enhances adhesion to a broad range of metallic substrates Protects against migration of volatile bitumen or plasticizers Easy application by brush or roller Packaging
1 gal. kit (0.75 gal. betway sports login A, 0.25 gal. betway sports login B)
4 gal. kit (3.0 gal. betway sports login A, 1.0 gal. betway sports login B)
Product Details
Product Information
Chemical Base Epoxy
Shelf Life 12 months in original, unopened and undamaged sealed containers
Storage Conditions Store dry between 40 °F and 95 °F (2-35 °C)
Condition material to 50-77 °F (10-25 °C) before using for ease of application.
Technical Information
Service Temperature -22-176 °F (-30-80 °C) intermittent
Application
Application Information
Mixing Ratio Component A : Component B = 3:1 (by volume)
PREMIX betway sports login A BEFORE MIXING PARTS A & B TOGETHER.
Ambient Air Temperature 41 °F (5 °C) min. / 95 °F (35 °C) max.
Relative Air Humidity 80 % R.H. max.
betway sports login Temperature 41 °F (5 °C) min. / 140°F (60°C) max.
Dew Point Beware of condensation. The betway sports login and uncured coating must be ≥ 5 °F (3 °C) above dew point.
betway sports login Moisture Content 4 % moisture content Test method: Sika®-Tramex meter No rising moisture according to ASTM (Polyethylene-sheet).
Pot Life 45 minutes
Consumption
Coverage Coverage:
250 ft²/gal. on non-absorbent smooth substrates. 200 ft²/gal. on prepared, dry concrete. 75-100 ft²/gal. on mineral surfaced modified bitumen.
Note: Rough, porous, or absorbent surfaces will require additional betway sports login and will reduce yield.
Application Steps
betway sports login PREPARATION All betway sports login surfaces shall be clean, dry and sound. Acceptable substrates include: sound concrete and masonry, wood and plywood, modified bitumen membrane, mineralized asphaltic cap sheet, asphalt and asphalt mastic, ferrous metals, galvanized, lead, copper, aluminum, brass, and stainless steel. Reference separate System Data Sheet for specific surface preparation requirements.
MIXING Mix ratio is 3:1 (A:B) by weight and volume. PREMIX betway sports login A BEFORE MIXING PARTS A & B TOGETHER. Add Part B into Part A and mix with a mechanical mixer (Jiffy) at low speed. Avoid adding air into the betway sports login during mixing. When fully mixed, the betway sports login should be free from streaks and of a uniform red color. Do not break down kits into smaller quantities.
APPLICATION Apply by brush or phenolic resin core roller at the recommended rate. Correct amount of betway sports login will saturate the substrate and leave a slight film on the substrate top surface. Apply evenly without puddling.
CLEANING OF TOOLS Remove wet betway sports login with MEK, xylene, or oxygenated solvents. Once cured, betway sports login can only be removed by mechanical means. Strictly follow solvent manufacturer’s warnings and instructions for use.
See More
See Less